jv16 PowerTools 2009 RC1 released

tullik

jv16 wrote
charlesn56 wroteI am using jvPT 2009 RC 1 and I am having two problems

1. I am using Software Uninstaller / Custom Uninstall Software part of the program.

...

Has any one seen this?

This problem should now be fixed (I couldn't reproduce the problem), thank you for reporting!

I also experienced the problem.

tullik wrote
charlesn56 wrote ... The problem is I have all of the registry item selected and it will not let me remove any of the items. I can also select only one and it still will not let me remove it.

Has any one seen this?

Yes. Look at the second issue in this post: http://www.macecraft.com/phpBB3/viewtopic.php?p=17170#p17170

The issue will probably be fixed in RC2 ...

jv16

roberta wrote

(1). Raw list format

(a). Scan Report shows "Registry health" & "Registry scan speed" sometimes as "Only available with full scan" or more often as blanks.

And if it should display "Only available with full scan"....,

..then Please change it to display the values here instead.....

This is by design, these two indicators are only available with the normal, full scan.

roberta wrote

(b). Error Severity Column ONLY has a numeric value (eg 30, or 80) => ERROR

Perhaps it should display the Red indicator used in Structured listing format (or? the old High, Medium, Low, etc)

This is by design, the Raw list format shows a numeric value while the structured list format shows the graph.

roberta wrote

(2). Structured list format

(b). Scan report: The values displayed in all result columns should be Left aligned (Not centered) so as to make long values more easily read.

I don't quite understand what you mean.

roberta wrote

(c). Scan report: When I reordered the columns this new column position setting was forgotten if jv16 PT shut down & re-started

If You dont shut down jv16PT, then it remembers the new positioning between Registry Cleaner runs, but it is lost if u shut down.

(d). Scan report: Can Not widen the right most column (to the right) so as to be able to read long values.

Can someone else confirm this problem?

roberta wrote

(e). Scan report: Can Not scroll horizontally (to view long values). Scroll bar missing.

Is this a theoretical problem, or did you see so long values?

roberta wrote

(f). Scan report: Trying to highlight/select any 1 or more of the top most results selects the wrong result(s), &/or there is a delay of 1-2 seconds before highlighting occurs

NB: in my case they were related to the entire Obsolete software entry group, which was listed at the top.

NB: This problem does not seem to occur for lower listed items.

This selection problem will be solved for RC2 (hopefully!).

(3). Registry Cleaner Raw vs Structured results comparisons

Structured List (No Deep scan): 19 Errors (same 19 Errors with Deep Scan)

Raw List: 7 Errors

Why this difference?

This is because the Raw list mode doesn't support listing of all registry error types, namely the errors relating to registry meta data such as the Incorrect Permission errors for example.

(4). Registry Cleaner Raw Listing, jv16 PT 2009 RC1 versus jv16 PT 2008 1.8.0.472

jv16 PT 2008 1.8.0.472: 9 Errors

jv16 PT 2009 RC1: 7 Errors

I checked the errors listed, & the ones listed by 1.8.0.472 are wrong, & none are duplicated...

..so why is 2009 RC1 missing 2 Errors?....

Could you show me these two errors and I could find out?

jv16

tullik wrote
Registry Cleaner, Search words

There is this minor message issue:

When you use multiple search words, and some have matches, but others do not, you get this message:

That message implies nothing was found.

This bug is now fixed, thank you for reporting!

jv16

redseujac wrote
jv16 wrote...All the translation problems detected and kindly reported are now fixed, thanks!

I think this one is forgotten?

- Tutorial:

- "Enter your email address here if you want, you don't have to!": English.lng > - 43 (text translated in

Dutch.lng yet!)

That text is not translated.

The developer has not reported the issue is fixed...

This issue is also fixed.

jv16

redseujac wrote
Backup Tool > Custom restore

There I have found another translation issue...

The following texts are NOT translated and they can't be translated: the X_ is missing when running X_English:

- Registry entries

- Files

- Header file

This problem is now fixed, thank you for reporting!

leonardo

jv16 wrote
roberta wrote

(1). Raw list format

roberta wrote

(c). Scan report: When I reordered the columns this new column position setting was forgotten if jv16 PT shut down & re-started

If You dont shut down jv16PT, then it remembers the new positioning between Registry Cleaner runs, but it is lost if u shut down.

(d). Scan report: Can Not widen the right most column (to the right) so as to be able to read long values.

Can someone else confirm this problem?

I can NOT confirm this finding of Roberta.

After reordering the columns, closing/restarting JV16Powertools and even Restarting Win-XP SP3, the changed column setting are carried over.

tullik

jv16 wrote
. . .
roberta wrote

(2). Structured list format

(b). Scan report: The values displayed in all result columns should be Left aligned (Not centered) so as to make long values more easily read. ...

I don't quite understand what you mean.

When a column cell contains a long value, such as a file path, often seeing the left part of a value is sufficient.

Sometimes you need to see the right part. Sometimes you need to see both parts. With the raw list, either can be accomplished easily by, for example, double-clicking the column heading margin.

With the centered alignment in the structured list, you can't see either the rightmost or leftmost part of many long values unless you drag-widen the column significantly.

siliconman01

Any luck on fixing the Startup Manager and Registry Compactor for Vista 64-bit?

jv16

tullik wrote
jv16 wrote. . .
roberta wrote

(2). Structured list format

(b). Scan report: The values displayed in all result columns should be Left aligned (Not centered) so as to make long values more easily read. ...

I don't quite understand what you mean.

When a column cell contains a long value, such as a file path, often seeing the left part of a value is sufficient.

Sometimes you need to see the right part. Sometimes you need to see both parts. With the raw list, either can be accomplished easily by, for example, double-clicking the column heading margin.

With the centered alignment in the structured list, you can't see either the rightmost or leftmost part of many long values unless you drag-widen the column significantly.

Oh, I thought we were talking about the Scan Report, not the actual results list of the Registry Cleaner. Now I can see what you mean and I'll see what I can do about the issue.

jv16

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

siliconman01

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

redseujac

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

jv16

tullik wrote
jv16 wrote
redseujac wroteThe Filter tool (CTRL+ALT+F) is merely visible (stretching through the other text)

This problem is now fixed (I removed the filter tool altogether, it was causing more problems than solving anything).

Too bad. The filter tool was very handy when analyzing large lists.

For example, one could avoid doing multiple rescans with different sets of ignore words.

And the new "Move down in list" feature made it easy to see the last line.

I suppose there were more severe problems I haven't even experienced.

Alright, I found another way to fix it. So the feature is back.

redseujac

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

jv16

tullik wrote
RegEdit jump , does not work correctly on some systems. . . . . . . . . . . . . . . . Unknown. . . . . . . . . . . . . (*)

This problem should now be fixed.

redseujac

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

tullik

Here's an updated issues fix estimate.

These four really should be fixed for RC2, especially the last two:

Automation Tool, Delete Files from directories tasks must be killed . . . . . . . . Unknown. . . . . . . . . . . . . (1)

PowerTools, errors on exit if more than one PT process exists . . . . . . . . . . . . Unknown . . . . . . . . . . . . (1)

Registry Cleaner, a reproducible structured list delete failure instance. . . . . . . Unknown. . . . . . . . . . . . . (1)

System Optimizer, cannot change a pre-set tweak. . . . . . . . . . . . . . . . . . . . Uncertain in RC1. . . . . . . . (1)

jv16

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

jv16

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

jv16

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

« Previous Page Next Page »