PowerTools Lite 2011 Beta1

jv16

Here is the Beta1 version of PowerTools Lite 2011:

(no longer available for download)

Please read the following before downloading

Remember that this is beta level software. This means that this version has been made available only for testing purposes. This version contains bugs and can potentially damage your computer and mind.

As always, we will give out free licenses to the best beta testers. If a beta tester already owns a license we can also issue VIP and Platinum VIP packages for free, or other such prizes.

However, you are not entitled for any kind of free license by simply downloading these beta versions. Free licenses are given out only to beta testers who give us valuable feedback, such as bug reports or improvement ideas. We will publish the list of users who won a free license after the final version of the product has been released, not before. All free licenses are decided on case-by-case, sometimes it takes just one message with two lines to earn a license (e.g. if you found a really good bug that no one else reported), sometimes it takes much more.

How to send your feedback

* Please use the Post Reply button of this thread for all feedback.

* If you are reporting a bug, please give as much information as possible in regards what steps are required to reproduce the problem. Also let us know what version of Windows you are using. There is no need to post the hardware configuration of your computer, unless asked.

* You can send attachments, including screenshots, to the thread from the Post Reply > Upload attachment tab (below the main text area).

* If you are reporting a bug that is not obvious, please include the Debug Log to your report. Note: the Debug Log contains information about your computer, if you do not wish other users to see all this information, you can use the Private Messages feature to send the Debug Log to us.

* If you are reporting a False Positive by the Clean and fix my computer tool, there is no need to send a Debug Log. To report a False Positive, simply send a Screenshot of the False Positive, and say what settings of the Clean and Fix My Computer you are using.

* You can also send you general feedback, how you feel the program works for you or if there is something you don't understand, or if some feature doesn't work the way you expected. Feedback like this is sometimes even more valuable than bug reports.

How to create a Debug Log

* If the problem doesn't cause PowerTools to crash: Go to the Main Window, open Debug menu and select "Save Debug Log". The Debug Log is saved to your Desktop.

* If the problem causes PowerTools to crash: Go to the installation directory of the program (c:\program files\PowerTools Lite 2011 BetaX\ by default) and create an empty file called "DebugMode.dat" there. Then start the program and re-create the problem. The Debug Log is being automatically saved to your desktop as you use the program.

Release Notes:

* This is fully functional software.

* The icons used in the main window are not yet final.

* The Download Handbook features of the setup or the program do not work yet (because the handbook is not ready yet)

What's New (compared to PowerTools Lite 1.9.0.589)

* Comes with the registry cleaner engine of jv16 PowerTools 2011, with improved accuracy and 64 bit Windows support.

And remember, please send all your feedback regarding this beta version to this thread! Thank you!

redseujac

On the main page the "Clean and fix my computer" string is not translated.

tyreman

Ran the software on Win 7 pro 64 bit here and so far it finds valid keys of left over software I have had.

Also cleans temp files well.

redseujac

Even with the most aggressive setting the tool does not list my actual temporary internet files, but neither jv16 PowerTools 2011 does.

Those temp internet files are not located in the default directory, but IMO despite that other location PowerTools should be able to list those files. Other software finds and lists them.

Besides it does not harm to list those temp internet files and show them ready for deletion.

erratictoad

Initial install went well but opened 2 windows of PowerTools.

1 - One gives a tip, the second also includes the tip but adds an error about failing to gian full read / write access to the registry - but other tools have not complained about this.

2 - After running for the first time it appeared to be OK so I upped the aggressive level and after 'fixing' and despite being told all was OK and that my PC & Registry health were 100% I was left with the following two items that couldn't be cleaned:

C:\Documents and Settings\xxxxxxxxx\Local Settings\Application Data\Microsoft\Windows Live Contacts\{16570c10-7f52-4574-a8df-b4525c26e9ee}\DBStore\LogFiles\1 Unneeded empty folder

C:\Documents and Settings\xxxxxxxxx\Local Settings\Application Data\Microsoft\Windows Live Contacts\{ca19b7b0-e617-4b6f-a475-8a57e60ae28d}\DBStore\LogFiles\1 Unneeded empty folder

3 - On trying to re-run I've received "an eror occurred in the application" and PTLite.exe has thrown up a tabbed error window but I can't see how to extract this for your perusal. Options open to me are continue, restart or close application. After a restart all seemed ok again - though item 2 above still exist.

tompres1

Tom P. runs into failed to remove error

Postby tompres1 » Mon Jun 06, 2011 6 pm

i just used JV lite beta for the first time. it improved my pc health from about 90 % to 98% and registry health from about 85 % to 99% But it showed an error so i ran it again but got the same error:

: Failed to remove "C:\Users\tomp\AppData\Local\Temp\FXSAPIDebugLogFile.txt"!

: All done! 0 errors were fixed, 712 B of data was removed (0 files, 0 directories, 1 registry entries and 0 registry keys).

the problem i have with the failed removed error is that jv powertools doesn't go far enough in explaining how to fix the error manually... or for that matter why there is an error in the first place. Why didn't jv power tools remove it? Does it lack administartive priveliges? Does removing this appdata cause harm to my computer? Is it safe to remove it manually?

I feel all alone here so i am going to search for it manually and remove it. Then i"m going to run jv tools again to see if my computer health is improved... seems like extra work that jv power tools should be doing or at least explaining...(Still love this program though. :) )

Tom P. :?

tompres1

New user

Posts: 2

Joined: Fri May 11, 2007 1 pm

tompres1

Re: Tom P. runs into failed to remove error

Postby tompres1 » Mon Jun 06, 2011 7 pm

i just tried to remove the file manually discussed in my last post. i was unable to do so because i got the message:

This action can't be completed because the file is open in windows explorer. close the file and try again.. i went into msconfig and closed the process for explorer.exe but i lost all the icons on by desk. The file shouldn't be this hard to remove.. it's just an empty notepad file.

i still have jv powertools 2011 vip on my desktop.. when i ran that my pc health dropped from 100 to 99. same with registry health.. How do i get rid of that file

I also found the following file on my desktop..



Debug Log of jv16 PowerTools 2011 

If you think the following debug log shows a bug or a crash in the product, Please post this log file and a description of the problem to Macecraft Software's forum. All users who help us to solve problems in our product will receive a free personal license for the product!

 DebugLog New SaveInterval = 0 (Old value: 100)
 +++ App Init Start +++
 Core StartTimeSoFar=16 msec
 Pre=C:\Program Files\PowerTools Lite 2011\
 Pre=\Settings\
 Pre=\Settings\
 Pre=C:\Program Files\PowerTools Lite 2011\Settings\
 Pre=C:\Program Files\PowerTools Lite 2011\Backups\
 Pre=C:\Program Files\PowerTools Lite 2011\Backups\
 Pre: step1
 Pre: step2
 Pre: step3
 Pre: step4
 Pre: step5
 Core
 Core="C:\Windows\"
 Core="C:\Windows\system32\"
 Core="C:\Users\tomp\Desktop\"
 Core="C:\Users\tomp\Documents\"
 Core
 → Function GetDateFormat : String;
 ← Function GetDateFormat : String;
 Core
 Core-1
 Core Filename=C:\Program Files\PowerTools Lite 2011\Settings\Settings.dat
 Core LangFile=English.lng
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\English.lng
 GF FileSize=153157
 GF SHA1=279fac23da06cbcbcb5fc517c6a94cc4c437574a
 GF Beginning=" PLEASE, READ THESE INSTRUCTIONS CAREFULLY: Do not translate the captions (like "") Do"
 GF SHA1-B="16bbfddd4e2a22a29100398ce96289261d8417f1"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 Core Result=C:\Program Files\PowerTools Lite 2011\Languages\English.lng
 Core-5
 Core Filename=C:\Program Files\PowerTools Lite 2011\Languages\English.lng
 Core
 Core, ShowMsg=""
 Core
 Core
 Core-6
 DefaultFormAction_FormOnCreate Start Form = NillForm
 DefaultFormAction_FormOnCreate End Form = NillForm
 → procedure TNillForm.FormCreate(Sender: TObject);
 ← procedure TNillForm.FormCreate(Sender: TObject);
 DefaultFormAction_FormOnShow Start - NillForm
 DefaultFormAction_FormOnShow 2
 DefaultFormAction_FormOnShow 4
 DefaultFormAction_FormOnShow 5
 DefaultFormAction_FormOnShow 6
 SetFormCaption Start, Form=NillForm, caption=""
 SetFormCaption Done, Form=NillForm, caption=""
 DefaultFormAction_FormOnShow 7
 → Function xf2_GetListView(iForm : Integer) : TListView;
 ← Function xf2_GetListView(iForm : Integer) : TListView;
 DefaultFormAction_FormOnShow Done
 ← Procedure dFormShow(Sender : TObject);
 NillForm.OnFormAfterShow Start
 NillForm.OnFormAfterShow xf2_CreateForm(Form_DebugLog)
 NillForm.OnFormAfterShow 1
 NillForm.OnFormAfterShow xf2_CreateForm(Form_MainForm)
 → Function xf2_IsCreated(iForm : Integer) : Boolean;
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_IsCreated(iForm : Integer) : Boolean;
 xf2_CreateForm Start, Form=1 "Main Window"
 DefaultFormAction_FormOnCreate Start Form = MainForm
 DefaultFormAction_FormOnCreate End Form = MainForm
 TMainForm Start
 MainForm 1
 GlobalVars.GlobalIgnoreList.Count=0
 TMainForm 2
 TMainForm 3
 TMainForm 4
 TMainForm End
 MainForm.OnFormCreate_Step2 Start
 SetFormCaption Start, Form=MainForm, caption="PowerTools Lite 2011 (2.0.0.1022) -- "
 SetFormCaption Done, Form=MainForm, caption="PowerTools Lite 2011  - Beta Testing Release (Beta1)"
 MainForm.OnFormCreate_Step2 2

 ===
 ===
 ===
 jv16 PowerTools 2011 
 2.0.0.1022
 LicFile1=C:\Program Files\PowerTools Lite 2011\license(4).xbin
 LicFile2=
 LicSN0=X11106X11129
 PLic=
 Lic_1_SN1=65884-3AFAE28F-738250858
 Lic_1_SN2=c56e0dee27be5a06e133a163dfb209e7d97de8ec
 Lic_2_SN1=
 Lic_2_SN2=e38773cd307c9ce01184f5caf4c246588eb4e6ce
 LangFile=C:\Program Files\PowerTools Lite 2011\Languages\English.lng
 ---
 AppDir=C:\Program Files\PowerTools Lite 2011\
 BackupDir=C:\Program Files\PowerTools Lite 2011\Backups\
 ConfigDir=C:\Program Files\PowerTools Lite 2011\Settings\
 CacheDir=C:\Program Files\PowerTools Lite 2011\Cache\
 LangDir=C:\Program Files\PowerTools Lite 2011\Languages\
 TempDir=C:\Users\tomp\AppData\Local\Temp\jv16PT_2011\
 TasksDir=C:\Program Files\PowerTools Lite 2011\Tasks\
 SnapshotDir=C:\Program Files\PowerTools Lite 2011\Snapshots\
 ---
 Exists(LicFile1)=True
 Exists(LicFile2)=False
 Exists(LangFile)=True
 Exists(AppDir)=True
 Exists(BackupDir)=True
 Exists(ConfigDir)=True
 Exists(CacheDir)=True
 Exists(LangDir)=True
 Exists(TempDir)=True
 Exists(TasksDir)=True
 Exists(SnapshotDir)=True
 ---
 Valid(LicFile1)=2
 Valid(LicFile2)=0
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\English.lng
 GF FileSize=153157
 GF SHA1=279fac23da06cbcbcb5fc517c6a94cc4c437574a
 GF Beginning=" PLEASE, READ THESE INSTRUCTIONS CAREFULLY: Do not translate the captions (like "") Do"
 GF SHA1-B="16bbfddd4e2a22a29100398ce96289261d8417f1"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 Valid(LangFile)=True
 ---
 WinVer=6.1.7601
 Win7=True
 WinVista=False
 WinXP=False
 Win64=False
 SysDir=C:\Windows\system32\
 WinLang=English (United States)
 CPU=1865 MHz
 FDrives=cd
 NFDrives=efghi
 ---
 Core Component Self Tests:
 Tools.Translator OK = True
 Tools.Settings OK = True
 Tools.FileSystemCache OK = True
 Tools.MsgManager OK = True
 Tools.SafetyNet OK = True
 Tools.RDA OK = True
 Tools.RC OK = True
 Tools.Sorter OK = True
 ---
 Translation.ProgDef = "jv16/PTLite"
 Translation.MainFont_Default = "Default"
 Translation.MainForm.5Jovn2 = "Performing Initial Setup"
 Translation.RegCleanerForm.GH6rt6 = "||˙||Automatically remove all found erroneous data (NOT RECOMMENDED)||˙||Automatically fix all found erroneous data (NOT RECOMMENDED)||˙||Use as little CPU power as possible||˙||Don't show items that would be automatically re-created||˙||Don't pop up the window after finishing||˙||Don't show the Scan Report after finishing||˙||Automatically select all found items||˙||Automatically expand the main result categories||˙||"
 ---
 Settings.ShowOnce.Tutorial = "True"
 Settings.Selection.FullRowSelect = "False"
 Settings.Startups.Startups = "4"

 ===
 ===
 ===

 MainForm.OnFormCreate_Step2 Done
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 → Procedure xf2_SetMainMenu(iForm : Integer);
 ← Procedure xf2_SetMainMenu(iForm : Integer);
 → Procedure xf2_SetStatusBar(iForm : Integer);
 ← Procedure xf2_SetStatusBar(iForm : Integer);
 xf2_CreateForm Done, Form=1 "Main Window"
 NillForm.OnFormAfterShow xf2_CreateForm(Form_LicTool)
 → Function xf2_IsCreated(iForm : Integer) : Boolean;
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_IsCreated(iForm : Integer) : Boolean;
 xf2_CreateForm Start, Form=26 "License Information Tool"
 DefaultFormAction_FormOnCreate Start Form = LicenseToolForm
 DefaultFormAction_FormOnCreate End Form = LicenseToolForm
 → procedure TLicenseToolForm.FormCreate(Sender: TObject);
 ← procedure TLicenseToolForm.FormCreate(Sender: TObject);
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 → Procedure xf2_SetStatusBar(iForm : Integer);
 ← Procedure xf2_SetStatusBar(iForm : Integer);
 xf2_CreateForm Done, Form=26 "License Information Tool"
 NillForm.OnFormAfterShow 2
 NillForm.OnFormAfterShow MainWindow=1, MainWindow="Main Window"
 → Function xf2_IsCreated(iForm : Integer) : Boolean;
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_IsCreated(iForm : Integer) : Boolean;
 SetAsMainForm Start, iForm=1
 SetAsMainForm NewForm= MainForm
 SetAsMainForm Done
 xf2_ShowForm Start, Form=1 "Main Window"
 → Function xf2_IsCreated(iForm : Integer) : Boolean;
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_IsCreated(iForm : Integer) : Boolean;
 → Procedure xf2_SetFormOptions(Form : TForm);
 ← Procedure xf2_SetFormOptions(Form : TForm);
 → Procedure xf2_SetMainMenu(iForm : Integer);
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Procedure xf2_SetMainMenu(iForm : Integer);
 xf2_ShowForm 2
 SetFormCaption Start, Form=MainForm, caption="PowerTools Lite 2011  - Beta Testing Release (Beta1)"
 SetFormCaption Done, Form=MainForm, caption="PowerTools Lite 2011  - Beta Testing Release (Beta1)"
 xf2_ShowForm fHeight=630
 xf2_ShowForm fWidth=600
 xf2_ShowForm fLeft=206
 xf2_ShowForm fTop=35
 xf2_ShowForm 4
 DefaultFormAction_FormOnShow Start - MainForm
 DefaultFormAction_FormOnShow 2
 DefaultFormAction_FormOnShow 3a, Translation filename ="C:\Program Files\PowerTools Lite 2011\Languages\English.lng"
 DefaultFormAction_FormOnShow 3b, Translation done!
 DefaultFormAction_FormOnShow 4
 DefaultFormAction_FormOnShow 5
 DefaultFormAction_FormOnShow 6
 SetFormCaption Start, Form=MainForm, caption="PowerTools Lite 2011  - Beta Testing Release (Beta1)"
 SetFormCaption Done, Form=MainForm, caption="PowerTools Lite 2011  - Beta Testing Release (Beta1)"
 DefaultFormAction_FormOnShow 7
 → Function xf2_GetListView(iForm : Integer) : TListView;
 ← Function xf2_GetListView(iForm : Integer) : TListView;
 DefaultFormAction_FormOnShow Done
 ← Procedure dFormShow(Sender : TObject);
 → procedure TMainForm.FormShow(Sender: TObject);
 TMainForm Start
 ShowTip Start, ID=24
 ShowTip Exit2b
 MainForm Start, Index=6
 MainForm Done
 TMainForm 1
 App Startups: 5
 +++ App Init Done +++ - Startup time: 5016 msec
 TMainForm End
 ← procedure TMainForm.FormShow(Sender: TObject);
 DefaultFormAction_FormOnAfterShow Start - MainForm
 DefaultFormAction_FormOnAfterShow 1
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 xf2_ShowForm Form.height=658
 xf2_ShowForm Form.width=600
 xf2_ShowForm Form.left=206
 xf2_ShowForm Form.top=35
 xf2_ShowForm 5
 xf2_ShowForm 6
 xf2_ShowForm Done, Form=1 "Main Window"
 NillForm.OnFormAfterShow Done, MainWindow=1
 NillForm.CloseTimer Start
 NillForm.CloseTimer Hide
 DefaultFormAction_FormOnHide - NillForm
 DefaultFormAction_FormOnHide Done
 NillForm.CloseTimer Done
 → Procedure TMainForm.OnAfterShown;
 MainForm Start
 FOnAfterShownDone=False
 MainForm.nil=False
 MainForm 1
 MainForm Start
 MainForm Done
 MainForm Start
 MainForm Done
 MainForm 2
 MainForm 1a
 GetIgnoredDrives2 Start
 GetIgnoredDrives2 Result.Text=""
 MainForm 1b
 FormOverlayExists Start
 FormOverlayExists Form=MainForm, OverlayCount=0
 FormOverlayExists Done, Result=False
 MainForm 2
 MainForm 5a
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Chinese Simplified.lng
 GF FileSize=137741
 GF SHA1=60395931d7a11dcfce900da2e2712d21e2b696fb
 GF Beginning="ď»ż  ProgVersion = 2.0 // Do not edit! ProgDef = jv16/PTLite // D"
 GF SHA1-B="ae1f432d80513647b9c0f035f426131e59633453"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Chinese Traditional.lng
 GF FileSize=141853
 GF SHA1=84e33c42ca69f79af2fec3c7f8ea109c8027ddf0
 GF Beginning=" PLEASE, READ THESE INSTRUCTIONS CAREFULLY: Do not translate the captions (like "") Do"
 GF SHA1-B="16bbfddd4e2a22a29100398ce96289261d8417f1"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Czech.lng
 GF FileSize=166511
 GF SHA1=f75f0ab4ca42981cdb460c43aeb0eb8b9dbe56fc
 GF Beginning="ď»ż ProgVersion = 2.0 // Neupravovat! ProgDef = jv16/PTLite // Neu"
 GF SHA1-B="89d2f64330a1822a83e7ecd8733c08b4491e50dd"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Danish.lng
 GF FileSize=140074
 GF SHA1=253684540534784f7474404c1e57d22c7c7e6719
 GF Beginning="ď»ż ProgVersion = 2.0 // Do not edit! ProgDef = jv16/PTLite // Do "
 GF SHA1-B="c8d696095b23c11e4500b62dd7ed77640d6a9cc0"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Dutch.lng
 GF FileSize=162189
 GF SHA1=a68b52f3c041454eccb16933d0ef005aa742475f
 GF Beginning="ď»ż ProgVersion = 2.0 // Niet bewerken! ProgDef = jv16/PTLite // Nie"
 GF SHA1-B="1948a9ab4a765d8ed12c171d280caeceacaebb55"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\English.lng
 GF FileSize=153157
 GF SHA1=279fac23da06cbcbcb5fc517c6a94cc4c437574a
 GF Beginning=" PLEASE, READ THESE INSTRUCTIONS CAREFULLY: Do not translate the captions (like "") Do"
 GF SHA1-B="16bbfddd4e2a22a29100398ce96289261d8417f1"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Finnish.lng
 GF FileSize=164857
 GF SHA1=54cf2175759fcd1820617cdb2a1d6610707cff57
 GF Beginning="ď»żPLEASE, READ THESE INSTRUCTIONS CAREFULLY: Do not translate the captions (like "") D"
 GF SHA1-B="df338b4c81e9f96a88cc97e08eaa1f28604f3799"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\French.lng
 GF FileSize=175891
 GF SHA1=cf678a9c7e9294db1a0e50da71da7ee63a417aed
 GF Beginning="ď»ż ProgVersion = 2.0 ProgDef = jv16/PTLite LangVersion = 3.3 SyntaxVersion = "
 GF SHA1-B="b79b5fe4a2ff86a172d4a88c5de2a42de06075d0"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\German.lng
 GF FileSize=166487
 GF SHA1=d8d11755d3e50f0968f39fa1d669a3cf78da5399
 GF Beginning="ď»ż ProgVersion = 2.0 ProgDef = jv16/PTLite LangVersion = 3.3 SyntaxVersion = "
 GF SHA1-B="b79b5fe4a2ff86a172d4a88c5de2a42de06075d0"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Italian.lng
 xf2_ShowForm Start, Form=126 "Live Support Tool"
 → Function xf2_IsCreated(iForm : Integer) : Boolean;
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_IsCreated(iForm : Integer) : Boolean;
 xf2_CreateForm Start, Form=126 "Live Support Tool"
 DefaultFormAction_FormOnCreate Start Form = LiveSupportForm
 DefaultFormAction_FormOnCreate End Form = LiveSupportForm
 → procedure TLiveSupportForm.FormCreate(Sender: TObject);
 ← procedure TLiveSupportForm.FormCreate(Sender: TObject);
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 → Procedure xf2_SetStatusBar(iForm : Integer);
 ← Procedure xf2_SetStatusBar(iForm : Integer);
 xf2_CreateForm Done, Form=126 "Live Support Tool"
 → Procedure xf2_SetFormOptions(Form : TForm);
 ← Procedure xf2_SetFormOptions(Form : TForm);
 → Procedure xf2_SetMainMenu(iForm : Integer);
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 xf2_ShowForm 2
 SetFormCaption Start, Form=LiveSupportForm, caption="Live Support"
 SetFormCaption Done, Form=LiveSupportForm, caption="PowerTools Lite 2011  - Live Support"
 xf2_ShowForm fHeight=306
 xf2_ShowForm fWidth=387
 xf2_ShowForm fLeft=527
 xf2_ShowForm fTop=277
 xf2_ShowForm 4
 DefaultFormAction_FormOnShow Start - LiveSupportForm
 DefaultFormAction_FormOnShow 2
 DefaultFormAction_FormOnShow 3a, Translation filename ="C:\Program Files\PowerTools Lite 2011\Languages\English.lng"
 DefaultFormAction_FormOnShow 3b, Translation done!
 DefaultFormAction_FormOnShow 4
 DefaultFormAction_FormOnShow 5
 DefaultFormAction_FormOnShow 6
 SetFormCaption Start, Form=LiveSupportForm, caption="Live Support"
 SetFormCaption Done, Form=LiveSupportForm, caption="PowerTools Lite 2011  - Live Support"
 DefaultFormAction_FormOnShow 7
 → Function xf2_GetListView(iForm : Integer) : TListView;
 ← Function xf2_GetListView(iForm : Integer) : TListView;
 DefaultFormAction_FormOnShow Done
 ← Procedure dFormShow(Sender : TObject);
 → procedure TLiveSupportForm.FormShow(Sender: TObject);
 MainForm Start
 FormOverlayExists Start
 FormOverlayExists Form=MainForm, OverlayCount=0
 FormOverlayExists Done, Result=False
 → Procedure TMainForm.VerifySystemAccess;
 → Procedure DoVerifySystemAccess;
 VerifySystemAccess Start, ShowSuccess = False
 VerifyAdminRights Start
 VerifyAdminRights OK
 VerifyAdminRights End
 VerifyRegistryAccess Start
 VerifyRegistryAccess.DoVerify "HKEY_LOCAL_MACHINE\Software\"
 VerifyRegistryAccess.DoVerify 1
 VerifyRegistryAccess.DoVerify 2
 VerifyRegistryAccess.DoVerify 3
 VerifyRegistryAccess.DoVerify 4
 VerifyRegistryAccess.DoVerify 5
 VerifyRegistryAccess.DoVerify 6
 VerifyRegistryAccess.DoVerify "HKEY_LOCAL_MACHINE\Software\Microsoft\"
 VerifyRegistryAccess.DoVerify 1
 VerifyRegistryAccess.DoVerify 2
 VerifyRegistryAccess.DoVerify 3
 VerifyRegistryAccess.DoVerify 4
 VerifyRegistryAccess.DoVerify 5
 VerifyRegistryAccess.DoVerify 6
 VerifyRegistryAccess.DoVerify "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\"
 VerifyRegistryAccess.DoVerify 1
 VerifyRegistryAccess.DoVerify 2
 VerifyRegistryAccess.DoVerify 3
 VerifyRegistryAccess.DoVerify 4
 VerifyRegistryAccess.DoVerify 5
 VerifyRegistryAccess.DoVerify 6
 VerifyRegistryAccess.DoVerify "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\"
 VerifyRegistryAccess.DoVerify 1
 VerifyRegistryAccess.DoVerify 2
 VerifyRegistryAccess.DoVerify 3
 VerifyRegistryAccess.DoVerify 4
 VerifyRegistryAccess.DoVerify 5
 VerifyRegistryAccess.DoVerify 6
 VerifyRegistryAccess.DoVerify "HKEY_CURRENT_USER\Software\"
 VerifyRegistryAccess.DoVerify 1
 VerifyRegistryAccess.DoVerify 2
 VerifyRegistryAccess.DoVerify 3
 VerifyRegistryAccess.DoVerify 4
 VerifyRegistryAccess.DoVerify 5
 VerifyRegistryAccess.DoVerify 6
 VerifyRegistryAccess.DoVerify "HKEY_CURRENT_USER\Software\Microsoft\"
 VerifyRegistryAccess.DoVerify 1
 VerifyRegistryAccess.DoVerify 2
 VerifyRegistryAccess.DoVerify 3
 VerifyRegistryAccess.DoVerify 4
 VerifyRegistryAccess.DoVerify 5
 VerifyRegistryAccess.DoVerify 6
 VerifyRegistryAccess.DoVerify "HKEY_CURRENT_USER\Software\Microsoft\Windows\"
 VerifyRegistryAccess.DoVerify 1
 VerifyRegistryAccess.DoVerify 2
 VerifyRegistryAccess.DoVerify 3
 VerifyRegistryAccess.DoVerify 4
 VerifyRegistryAccess.DoVerify 5
 VerifyRegistryAccess.DoVerify 6
 VerifyRegistryAccess.DoVerify "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\"
 VerifyRegistryAccess.DoVerify 1
 VerifyRegistryAccess.DoVerify 2
 VerifyRegistryAccess.DoVerify 3
 VerifyRegistryAccess.DoVerify 4
 VerifyRegistryAccess.DoVerify 5
 VerifyRegistryAccess.DoVerify 6
 VerifyRegistryAccess.DoVerify "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\"
 VerifyRegistryAccess.DoVerify 1
 VerifyRegistryAccess.DoVerify 2
 VerifyRegistryAccess.DoVerify 3
 VerifyRegistryAccess.DoVerify 4
 VerifyRegistryAccess.DoVerify 5
 VerifyRegistryAccess.DoVerify 6
 VerifyRegistryAccess End
 VerifyFilesystemAccess Start
 VerifyFilesystemAccess Dir="C:\Windows\", Exists=True
 CheckGIL: DeleteFile, Items: 0 Start
 VerifyFilesystemAccess End
 VerifyAntiVirus Start
 VerifyAntiVirus Checking for "avgnt.exe"...
 VerifyAntiVirus ..."avgnt.exe" Not found.
 VerifyAntiVirus Checking for "rtvscan.exe"...
 VerifyAntiVirus ..."rtvscan.exe" Not found.
 VerifyAntiVirus Checking for "Navapsvc.exe"...
 VerifyAntiVirus ..."Navapsvc.exe" Not found.
 VerifyAntiVirus Checking for "bdss.exe"...
 VerifyAntiVirus ..."bdss.exe" Not found.
 VerifyAntiVirus Checking for "ashServ.exe"...
 VerifyAntiVirus ..."ashServ.exe" Not found.
 VerifyAntiVirus Checking for "vptray.exe"...
 VerifyAntiVirus ..."vptray.exe" Not found.
 VerifyAntiVirus Checking for "fssm32.exe"...
 VerifyAntiVirus ..."fssm32.exe" Not found.
 VerifyAntiVirus End
 VerifySystemAccess End
 ← Procedure DoVerifySystemAccess;
 ← Procedure TMainForm.VerifySystemAccess;
 MainForm End
 ← procedure TLiveSupportForm.FormShow(Sender: TObject);
 DefaultFormAction_FormOnAfterShow Start - LiveSupportForm
 DefaultFormAction_FormOnAfterShow 1
 DefaultFormAction_LoadToolPreferences Start, AutoLoad=True
 → Procedure InitalizePreferenceSavingUI(Form : TForm);
 DefaultFormAction_FormOnAfterShow 2
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 xf2_ShowForm Form.height=257
 xf2_ShowForm Form.width=393
 xf2_ShowForm Form.left=527
 xf2_ShowForm Form.top=277
 xf2_ShowForm 5
 xf2_ShowForm 6
 xf2_ShowForm Done, Form=126 "Live Support Tool"
 GF FileSize=164588
 GF SHA1=0ca5a0cabb5ed36a44f421967f94f324e34f8c6c
 GF Beginning="ď»ż PLEASE, READ THESE INSTRUCTIONS CAREFULLY: Do not translate the captions (like "") "
 GF SHA1-B="76d71554950df8b063329e77130b9f85ac1ebb74"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Japanese.lng
 GF FileSize=198146
 GF SHA1=cee8cebf30b22e4aab6c1a59f865a120992eee2b
 GF Beginning=" PLEASE, READ THESE INSTRUCTIONS CAREFULLY: Do not translate the captions (like "") Do"
 GF SHA1-B="16bbfddd4e2a22a29100398ce96289261d8417f1"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Polish.lng
 GF FileSize=158606
 GF SHA1=576183c9b94bef7d9955ea77d22fb83ddd6c087f
 GF Beginning=" PLEASE, READ THESE INSTRUCTIONS CAREFULLY: Do not translate the captions (like "") Do"
 GF SHA1-B="16bbfddd4e2a22a29100398ce96289261d8417f1"
 GF ProgVer=""
 GF ProgDef=""
 GF LangVer=""
 GF Result=False
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Russian.lng
 GF FileSize=252868
 GF SHA1=25d21816985ce9609af3dd65b3d5b6d27d51620a
 GF Beginning=" PLEASE, READ THESE INSTRUCTIONS CAREFULLY: Do not translate the captions (like "") Do"
 GF SHA1-B="16bbfddd4e2a22a29100398ce96289261d8417f1"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Slovak.lng
 GF FileSize=152027
 GF SHA1=db4da28f4cecac295b9d00a8822684b10fbcdcb2
 GF Beginning=" ProgVersion = 2.0 // Do not edit! ProgDef = jv16/PTLite // Do not"
 GF SHA1-B="9132737974df6edb026b0fd682c3a5b882e66f06"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 → Procedure TLiveSupportForm.StartLiveSupportStatusCheck;
 FormOverlayCreate Start
 FormOverlayCreate Form=LiveSupportForm
 FormOverlayDestroy Start
 FormOverlayDestroy Form=LiveSupportForm, FormOverlays.Count=0
 FormOverlayDestroy Done
 FormOverlayCreate Done
 → Procedure TLiveSupportForm.OnLiveSupportStatusCheckDone(Status : Integer; ServerMessage : String; ServerMessageType : Integer);
 → Procedure TMainForm.LiveSupport_OnStatusCheckDone(Status : Integer; ServerMessage : String; ServerMessageType : Integer);
 ← Procedure TMainForm.LiveSupport_OnStatusCheckDone(Status : Integer; ServerMessage : String; ServerMessageType : Integer);
 FormOverlayDestroy Start
 FormOverlayDestroy Form=LiveSupportForm, FormOverlays.Count=1
 FormOverlayDestroy Loop, pFormName=LiveSupportForm
 FormOverlayDestroy Overlay found!, i=0
 FormOverlayDestroy Done
 ← Procedure TLiveSupportForm.OnLiveSupportStatusCheckDone(Status : Integer; ServerMessage : String; ServerMessageType : Integer);
 ← Procedure TLiveSupportForm.StartLiveSupportStatusCheck;
 GF Filename=C:\Program Files\PowerTools Lite 2011\Languages\Swedish.lng
 GF FileSize=147193
 GF SHA1=8f0b25957f0846b80ba375b44fcc6b573f7009bd
 GF Beginning="ď»ż78FP57 = StĂ¤ng 78fp57 = Will translate two different buttons! So do not modify the Entry Names"
 GF SHA1-B="c85f36d298cfe33a0256c01b89a742850aaa1223"
 GF ProgVer="2.0"
 GF ProgDef="jv16/PTLite"
 GF LangVer="3.3"
 GF Result=True
 MainForm 5b
 MainForm 5c
 → Procedure TMainForm.UpdateToolsMenu;
 MainForm Start
 MainForm End
 ← Procedure TMainForm.UpdateToolsMenu;
 MainForm 6
 MainForm 3
 CheckGIL: DeleteFile, Items: 0 Start
 MainForm 7
 MainForm 8
 ShowTip Start, ID=24
 FormOverlayExists Start
 FormOverlayExists Form=MainForm, OverlayCount=0
 FormOverlayExists Done, Result=False
 GF Start ID=24
 GF 2
 GF End ID=24
 ShowTip Done
 MainForm 9
 LoadRC Start, Count=0
 → Function FormatFileSize(Size : Extended; MBFormat : Boolean = False) : String;
 ← Function FormatFileSize(Size : Extended; MBFormat : Boolean = False) : String;
 LoadRC Size=156.7 KB
 LoadRC Result=False
 LoadRC Done, Count=3270
 FormOverlayExists Start
 FormOverlayExists Form=MainForm, OverlayCount=0
 FormOverlayExists Done, Result=False
 → Procedure TMainForm.LiveSupport_StartStatusCheck(AskPermission : Boolean);
 → Procedure TMainForm.LiveSupport_OnStatusCheckDone(Status : Integer; ServerMessage : String; ServerMessageType : Integer);
 ← Procedure TMainForm.LiveSupport_OnStatusCheckDone(Status : Integer; ServerMessage : String; ServerMessageType : Integer);
 ← Procedure TMainForm.LiveSupport_StartStatusCheck(AskPermission : Boolean);
 MainForm 7
 → Function xf2_IsCreated(iForm : Integer) : Boolean;
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_IsCreated(iForm : Integer) : Boolean;
 xf2_CreateForm Start, Form=92 "Check for updates"
 DefaultFormAction_FormOnCreate Start Form = InternetUpdateForm
 DefaultFormAction_FormOnCreate End Form = InternetUpdateForm
 → procedure TInternetUpdateForm.FormCreate(Sender: TObject);
 ← procedure TInternetUpdateForm.FormCreate(Sender: TObject);
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 → Procedure xf2_SetStatusBar(iForm : Integer);
 ← Procedure xf2_SetStatusBar(iForm : Integer);
 xf2_CreateForm Done, Form=92 "Check for updates"
 VersionCheck_Start AutoCheckCall=True
 CanDoAutomaticCheck 1 Result=True
 CanDoAutomaticCheck 2 Result=True
 CanDoAutomaticCheck Result=True
 VersionCheck_Start Done
 MainForm 8
 MainForm 10
 MainForm 11
 MainForm End
 ← Procedure TMainForm.OnAfterShown;
 → Procedure TInternetUpdateForm.VersionCheck_Done(VersionData : String);
 CanDoAutomaticCheck 1 Result=True
 CanDoAutomaticCheck 2 Result=True
 CanDoAutomaticCheck Result=True
 VersionCheckDone Data1=" syntax="1.0" ver="1.9.0.589" uninstall="1" reg_price="" upg_price="" eshop_link="" features_link="http://www.macecraft.com/" download_link="http://www.macecraft.com/downloads/PTLite_setup.exe" ", Data2=""
 → Procedure TInternetUpdateForm.ParseVersionData(Data : String; Var NewVersionString : String);
 ParseVersionData i=1, AIL=1
 ParseVersionData Ver="1.9.0.x"
 ParseVersionData i=236, AIL=2
 ParseVersionData Ver=""
 ParseVersionData Loop done
 UpdateDynamicContent Start, gbUpdateInfo.height=30, GUIPanelVList1.Height=182, ClientHeigth=747 ClientWidth=360
 UpdateDynamicContent NoVisible, Aborting...
 ← Procedure TInternetUpdateForm.ParseVersionData(Data : String; Var NewVersionString : String);
 ← Procedure TInternetUpdateForm.VersionCheck_Done(VersionData : String);
 → procedure TLiveSupportForm.btnStartChatClick(Sender: TObject);
 → Procedure TLiveSupportForm.StartLiveSupportSession;
 ← Procedure TLiveSupportForm.StartLiveSupportSession;
 ← procedure TLiveSupportForm.btnStartChatClick(Sender: TObject);
 DefaultFormAction_FormOnCloseQuery Start, ProgStarting=False
 DefaultFormAction_FormOnCloseQuery Start - MainForm
 DefaultFormAction_FormOnCloseQuery i=1
 DefaultFormAction_FormOnCloseQuery Ref=538646156, RefDelta=238625
 DefaultFormAction_FormOnCloseQuery FormPosSave
 DefaultFormAction_FormOnCloseQuery 2
 DefaultFormAction_FormOnCloseQuery 3
 DefaultFormAction_FormOnCloseQuery AreOtherWindowsVisible=True
 DefaultFormAction_FormOnCloseQuery 4
 DefaultFormAction_FormOnHide - MainForm
 DefaultFormAction_FormOnHide FormPosSave
 DefaultFormAction_FormOnHide 3
 DefaultFormAction_SaveToolPreferences Start, AutoSave=True
 DefaultFormAction_FormOnHide 4
 DefaultFormAction_FormOnHide Done
 → procedure TMainForm.FormCloseQuery(Sender: TObject; var CanClose: Boolean);
 ← procedure TMainForm.FormCloseQuery(Sender: TObject; var CanClose: Boolean);
 → procedure TLiveSupportForm.CloseBtnClick(Sender: TObject);
 DefaultFormAction_FormOnCloseQuery Start, ProgStarting=False
 DefaultFormAction_FormOnCloseQuery Start - LiveSupportForm
 DefaultFormAction_FormOnCloseQuery i=0
 DefaultFormAction_FormOnCloseQuery Ref=538650390, RefDelta=237203
 DefaultFormAction_FormOnCloseQuery FormPosSave
 DefaultFormAction_FormOnHide - LiveSupportForm
 DefaultFormAction_FormOnHide FormPosSave
 DefaultFormAction_FormOnHide 3
 DefaultFormAction_SaveToolPreferences Start, AutoSave=True
 DefaultFormAction_FormOnHide 4
 DefaultFormAction_FormOnHide Done
 FormOverlayDestroy Start
 FormOverlayDestroy Form=LiveSupportForm, FormOverlays.Count=0
 FormOverlayDestroy Done
 DefaultFormAction_FormOnCloseQuery 2
 DefaultFormAction_FormOnCloseQuery 5
 DefaultFormAction_FormOnCloseQuery AreOtherWindowsVisible=False
 DefaultFormAction_FormOnCloseQuery 6
 DefaultFormAction_FormOnCloseQuery GlobalVars.ApplicationMainForm=MainForm
 xf2_ShowForm Start, Form=1 "Main Window"
 → Function xf2_IsCreated(iForm : Integer) : Boolean;
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_IsCreated(iForm : Integer) : Boolean;
 → Procedure xf2_SetFormOptions(Form : TForm);
 ← Procedure xf2_SetFormOptions(Form : TForm);
 → Procedure xf2_SetMainMenu(iForm : Integer);
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Procedure xf2_SetMainMenu(iForm : Integer);
 xf2_ShowForm 2
 SetFormCaption Start, Form=MainForm, caption="PowerTools Lite 2011  - Beta Testing Release (Beta1)"
 SetFormCaption Done, Form=MainForm, caption="PowerTools Lite 2011  - Beta Testing Release (Beta1)"
 xf2_ShowForm fHeight=630
 xf2_ShowForm fWidth=600
 xf2_ShowForm fLeft=4
 xf2_ShowForm fTop=0
 xf2_ShowForm 4
 DefaultFormAction_FormOnShow Start - MainForm
 DefaultFormAction_FormOnShow 2
 DefaultFormAction_FormOnShow 3a, Translation filename ="C:\Program Files\PowerTools Lite 2011\Languages\English.lng"
 DefaultFormAction_FormOnShow 3b, Translation done!
 DefaultFormAction_FormOnShow 4
 DefaultFormAction_FormOnShow 5
 DefaultFormAction_FormOnShow 6
 SetFormCaption Start, Form=MainForm, caption="PowerTools Lite 2011  - Beta Testing Release (Beta1)"
 SetFormCaption Done, Form=MainForm, caption="PowerTools Lite 2011  - Beta Testing Release (Beta1)"
 DefaultFormAction_FormOnShow 7
 → Function xf2_GetListView(iForm : Integer) : TListView;
 ← Function xf2_GetListView(iForm : Integer) : TListView;
 DefaultFormAction_FormOnShow Done
 ← Procedure dFormShow(Sender : TObject);
 → procedure TMainForm.FormShow(Sender: TObject);
 TMainForm Start
 → Procedure TLiveSupportForm.StartLiveSupportStatusCheck;
 → Procedure TLiveSupportForm.OnLiveSupportStatusCheckDone(Status : Integer; ServerMessage : String; ServerMessageType : Integer);
 → Procedure TMainForm.LiveSupport_OnStatusCheckDone(Status : Integer; ServerMessage : String; ServerMessageType : Integer);
 ← Procedure TMainForm.LiveSupport_OnStatusCheckDone(Status : Integer; ServerMessage : String; ServerMessageType : Integer);
 FormOverlayDestroy Start
 FormOverlayDestroy Form=LiveSupportForm, FormOverlays.Count=0
 FormOverlayDestroy Done
 ← Procedure TLiveSupportForm.OnLiveSupportStatusCheckDone(Status : Integer; ServerMessage : String; ServerMessageType : Integer);
 ← Procedure TLiveSupportForm.StartLiveSupportStatusCheck;
 TMainForm 1
 TMainForm End
 ← procedure TMainForm.FormShow(Sender: TObject);
 DefaultFormAction_FormOnAfterShow Start - MainForm
 DefaultFormAction_FormOnAfterShow 1
 → Function xf2_to_TForm(iForm : Integer) : TForm;
 ← Function xf2_to_TForm(iForm : Integer) : TForm;
 xf2_ShowForm Form.height=658
 xf2_ShowForm Form.width=600
 xf2_ShowForm Form.left=4
 xf2_ShowForm Form.top=0
 xf2_ShowForm 5
 xf2_ShowForm 6
 xf2_ShowForm Done, Form=1 "Main Window"
 DefaultFormAction_FormOnCloseQuery 7
 DefaultFormAction_FormOnCloseQuery Done
 ← procedure TLiveSupportForm.CloseBtnClick(Sender: TObject);
 → Procedure TMainForm.OnAfterShown;
 MainForm Start
 FOnAfterShownDone=True
 MainForm.nil=False
 DefaultFormAction_FormOnCloseQuery Start, ProgStarting=False
 DefaultFormAction_FormOnCloseQuery Start - MainForm
 DefaultFormAction_FormOnCloseQuery i=1
 DefaultFormAction_FormOnCloseQuery Ref=538889375, RefDelta=63984
 DefaultFormAction_FormOnCloseQuery FormPosSave
 DefaultFormAction_FormOnCloseQuery 2
 DefaultFormAction_FormOnCloseQuery 3
 DefaultFormAction_FormOnCloseQuery AreOtherWindowsVisible=False
 DebugLog New SaveInterval = 0 (Old value: 0)
 Core - CallID: 2, WindowsShutdown = False
 DefaultFormAction_FormOnCloseQuery 7
 DefaultFormAction_FormOnCloseQuery Done
 → procedure TMainForm.FormCloseQuery(Sender: TObject; var CanClose: Boolean);
 ← procedure TMainForm.FormCloseQuery(Sender: TObject; var CanClose: Boolean);
 DefaultFormAction_FormOnHide - MainForm
 DefaultFormAction_FormOnHide FormPosSave
 DefaultFormAction_FormOnHide 3
 DefaultFormAction_SaveToolPreferences Start, AutoSave=True
 DefaultFormAction_FormOnHide 4
 DefaultFormAction_FormOnHide Done
 → Procedure TMainForm.OnAfterShown;
 MainForm Start
 FOnAfterShownDone=True
 MainForm.nil=False

leonardo

tompres1 wrote
..... also found the following file on my desktop.....Debug Log of jv16 PowerTools 2011

If you think the following debug log shows a bug or a crash in the product, Please post this log file and a description of the problem to Macecraft Software's forum.

All users who help us to solve problems in our product will receive a free personal license for the product!

I think the developer(jv16) wants to get the Debug Log, as a zipped file, attached to your forum post.

If more users Cut & Paste the full Debug Log text to this forum thread, the forum becomes practically 'unreadable'.

fgecme

You have settings on the main page as well as on the lead or first page. Can't the two be merged into just one?

travelingdanrn

Says it was OK and cleaned all but did not clean anything. Yet everything except Start Menu and Desktop Items has disappeared off the next "Fix" screen.

Windows 7 (32 bit) on an older HP laptop with Office 2010.

I was going to send the debug file but html, docx, txt extensions are denied. What extensions can I use to send the file?

: All done! 0 errors were fixed, 720 B of data was removed (0 files, 1 directories, 1 registry entries and 0 registry keys).

: All done! 0 errors were fixed, 0 B of data was removed (0 files, 0 directories, 0 registry entries and 0 registry keys).

No errors were fixed?

Dan

leonardo

travelingdanrn wrote
Says it was OK and cleaned all but did not clean anything. Yet everything except Start Menu and Desktop Items has disappeared off the next "Fix" screen.

Windows 7 (32 bit) on an older HP laptop with Office 2010.

I was going to send the debug file but html, docx, txt extensions are denied. What extensions can I use to send the file?

The Debug Log file must be zipped first before it can be attached to your forum post.

travelingdanrn wrote
: All done! 0 errors were fixed, 720 B of data was removed (0 files, 1 directories, 1 registry entries and 0 registry keys).

No errors were fixed?

In almost all cases, errors can not be fixed (repaired) and consequently will be removed. So your scan + fix looks quite normal to me.

jv16

redseujac wrote
On the main page the "Clean and fix my computer" string is not translated.

You are correct, this is now fixed. The icons do not show any tool tips either, this is also now fixed.

jv16

redseujac wrote
Even with the most aggressive setting the tool does not list my actual temporary internet files, but neither jv16 PowerTools 2011 does.

Those temp internet files are not located in the default directory, but IMO despite that other location PowerTools should be able to list those files. Other software finds and lists them.

Besides it does not harm to list those temp internet files and show them ready for deletion.

This is now fixed, the same improvement will also be included to the next released build of jv16 PowerTools. Thanks for reportin!

jv16

erratictoad wrote
Initial install went well but opened 2 windows of PowerTools.

1 - One gives a tip, the second also includes the tip but adds an error about failing to gian full read / write access to the registry - but other tools have not complained about this.

Did you double click the icon to start PowerTools Lite after the installation?

erratictoad wrote

2 - After running for the first time it appeared to be OK so I upped the aggressive level and after 'fixing' and despite being told all was OK and that my PC & Registry health were 100% I was left with the following two items that couldn't be cleaned:

C:\Documents and Settings\xxxxxxxxx\Local Settings\Application Data\Microsoft\Windows Live Contacts\{16570c10-7f52-4574-a8df-b4525c26e9ee}\DBStore\LogFiles\1 Unneeded empty folder

C:\Documents and Settings\xxxxxxxxx\Local Settings\Application Data\Microsoft\Windows Live Contacts\{ca19b7b0-e617-4b6f-a475-8a57e60ae28d}\DBStore\LogFiles\1 Unneeded empty folder

This is normal, sometimes the program finds data that you do not have access to remove or modify.

erratictoad wrote

3 - On trying to re-run I've received "an eror occurred in the application" and PTLite.exe has thrown up a tabbed error window but I can't see how to extract this for your perusal. Options open to me are continue, restart or close application. After a restart all seemed ok again - though item 2 above still exist.

When this happens, a file called BugReport.txt is automatically created to the installation directory of PowerTools Lite. Please zip the file and send it over, this would help me to further analyze the issue.

tullik

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

tullik

On X64 Windows 7 HP with version 2.0.0.1022

Here are two small issues regarding the Backup Tool's main list:

1. Sometimes, redundant information is prefixed to the generated description. See the last two lines in the screen snip below. I don't know if I can make it happen again, on purpose.

2. If a line's description is changed, the change shows in the list immediately. However, if you close the tool and start it again in the same session, the change no longer shows. It will show in a new session.

*Capture redundant.JPG

leonardo

PowerTools Lite version 2.0.0.1022 -> go to Main menu -> click 'Backups' -> click 'File' option in upper left window corner -> the pull down menu shows two 'Close' options!

However the first 'Close' option appears to be a 'Print' option and the second 'Close' option is the actual close option.

tullik

On X64 Windows 7 HP with version 2.0.0.1022

This is a very trivial bug:

The files ...\Cache\ProgramDirs.dat and ...\Cache\SearchDirs.dat can contain a leading empty line.

leonardo

tullik wrote
On X64 Windows 7 HP with version 2.0.0.1022

This is a very trivial bug:

The files ...\Cache\ProgramDirs.dat and ...\Cache\SearchDirs.dat can contain a leading empty line.

XP-SP3 with with version 2.0.0.1022

Issue confirmed

tullik

On X64 Windows 7 HP with version 2.0.0.1022

The program generates a voluminous UserActionLog.txt.

I suppose either this will not be done in the released program, or the user interface to the feature will be added.