We know that every problem has a solution and so does this. But before moving towards solutions, let us discuss the reasons that ensue this issue. It is difficult to point out the exact causes of this problem, but the most common reasons are:<\/p>\n
- \n
- Incorrect, faulty, or outdated network adapter drivers or network configuration settings<\/li>\n
- Faulty IP address assigned to your computer<\/li>\n
- Any temporary glitch or fault in router or modem<\/li>\n<\/ul>\n
No matter, what is the reason behind the issue of ethernet doesn\u2019t have a valid ip configuration, it isn\u2019t a permanent issue and I will elaborate some common methods with easy descriptions and screenshots that will help you troubleshoot this issue with just a few clicks.<\/p>\n
How do I fix Ethernet doesn’t <\/strong>have a valid IP configuration?<\/strong><\/h2>\n
First and most importantly of all, make sure the ethernet cable<\/a> is not damaged and properly connected to the computer. Now, follow the below guidelines to fix the problem of ethernet doesn’t have a valid ip configuration.<\/p>\n
Restart Your Computer – Disable Fast Start Up<\/strong><\/h2>\n
The simplest and easiest method to fix this issue is by restarting your computer after disabling Fast Start Up. It will remove any temporary bug or glitch in the system. It has yielded results for many users and hopefully it will also work for you. To disable Fast Start Up:<\/p>\n
- \n
- Go to the Control Panel on your PC and click on Power Options from the interface.<\/li>\n<\/ul>\n
![\"Windows](\"https:\/\/jv16powertools.com\/wordpress\/wp-content\/uploads\/2021\/01\/power-options-control-panel.png\")
<\/a><\/p>\n\u00b7<\/p>\n
- \n
- Here, click on Choose what the power button does in the left tab and then click on the Change settings that are currently unavailable.<\/li>\n<\/ul>\n
![\"Change](\"https:\/\/jv16powertools.com\/wordpress\/wp-content\/uploads\/2021\/01\/Change-settings-that-are-currently-unavailable.png\")
<\/a><\/p>\n- \n
- Now, uncheck the Turn on fast startup (recommended) option on the screen and finally, click on the Save Changes at the bottom and Fast Start Up will be disabled.<\/li>\n<\/ul>\n
![\"Turn](\"https:\/\/jv16powertools.com\/wordpress\/wp-content\/uploads\/2021\/01\/Turn-on-fast-startup-recommended.png\")
<\/a><\/p>\n- \n
- After that, restart your computer and connect the ethernet cable firmly into the computer and check if the issue persists.<\/li>\n<\/ul>\n
Troubleshoot W<\/strong>indows 10<\/strong><\/h2>\n
Windows 10 has a built-in mechanism of detecting many system bugs automatically and fixing them. So, you have to try this innate and remarkable feature of Windows 10. \u00a0To troubleshoot Windows 10:<\/p>\n
- \n
- Firstly, press Windows + X keys and navigate to the Update & Security section on the screen.<\/li>\n
- Now, click on Troubleshoot on the left tab and then click Run the Troubleshooter.<\/li>\n<\/ul>\n
![\"Microsoft](\"https:\/\/jv16powertools.com\/wordpress\/wp-content\/uploads\/2021\/01\/Troubleshoot.png\")
<\/a><\/p>\n- \n
- Windows will now automatically detect any underlying malware or bugs in the computer. Once it has finished running, follow the instructions on the Troubleshooter window to complete the process.<\/li>\n
- Lastly, reboot the computer and check if issue is solved or not.<\/li>\n<\/ul>\n
Resetting IP <\/strong>Configuration<\/strong><\/h2>\n
One of the very effective methods to solve the problem is by Resetting IP Configuration. You just have to enter some commands in the command prompt window, So:<\/p>\n
- \n
- Press windows + X buttons and select Command Prompt (Admin) and enter the below commands one by one and press Enter after each command.<\/li>\n<\/ul>\n
nbtstat \u2013R<\/em>
\nnbtstat \u2013RR<\/em>
\nnetsh int ip reset c:\\resetlog.txt<\/em>
\nnetsh winsock rese<\/em>
\nipconfig \/release<\/em>
\nipconfig \/flushdns<\/em>
\nipconfig \/renew<\/em><\/p>\n- \n
- It will clear cache and refresh IP configuration and identification number. Again, reboot your computer and then go to Control Panel > Network and Sharing Center > Change Adapter Settings.<\/li>\n
- Here, right click on the Ethernet hardware and Disable it. Now, after a few seconds, again right-click it and Enable it and then once again restart your computer and try to connecting Ethernet with your computer again.<\/li>\n<\/ul>\n
Check Network Adaptor Settings <\/strong><\/h2>\n
Your router automatically assigns the IP address. This setting is by default on your computer; however, you can change this setting to designate an IP address manually. \u00a0For that, follow the below steps:<\/p>\n
- \n
- Press Windows + R keys and Run window will pop up. Type ncpa.cpl in the search bar and then click on Ok.<\/li>\n
- Now, you will enter the Network Connections interface. Right click on the Ethernet Network icon and then select properties and properties window will pop out.<\/li>\n
- Here, select Internet Protocol Version 4 (TCP\/IPv4) option and then click on properties at the bottom right corner of the window. It will show Internet Protocol Version 6 (TCP\/IPv6) instead if you are using IPv6.<\/li>\n<\/ul>\n
- Press windows + X buttons and select Command Prompt (Admin) and enter the below commands one by one and press Enter after each command.<\/li>\n<\/ul>\n
- After that, restart your computer and connect the ethernet cable firmly into the computer and check if the issue persists.<\/li>\n<\/ul>\n
- Now, uncheck the Turn on fast startup (recommended) option on the screen and finally, click on the Save Changes at the bottom and Fast Start Up will be disabled.<\/li>\n<\/ul>\n
- Here, click on Choose what the power button does in the left tab and then click on the Change settings that are currently unavailable.<\/li>\n<\/ul>\n
- Go to the Control Panel on your PC and click on Power Options from the interface.<\/li>\n<\/ul>\n
![\"internet](\"https:\/\/jv16powertools.com\/wordpress\/wp-content\/uploads\/2021\/01\/internet-protocol-version-4.png\")
<\/a><\/p>\n![\"ethernet](\"https:\/\/jv16powertools.com\/wordpress\/wp-content\/uploads\/2021\/01\/ethernet-valid-ip-configuration-IP-address-manual-1.png\")
<\/a><\/p>\n![\"update](\"https:\/\/jv16powertools.com\/wordpress\/wp-content\/uploads\/2021\/02\/update-ethernet-dirver-software.png\")
<\/a><\/p>\n